Skip to main content
Schedule a free estimate
(253) 392-9266 Pacificremodelingllc@gmail.com
Kitchen Cabinets Cost Per Linear Foot: $470 to $950 Installed in Puyallup (2026)
Home / Blog / Kitchen Cabinets Cost Per Linear Foot: $470 to $950 Installed in Puyallup (2026)

Kitchen Cabinets Cost Per Linear Foot: $470 to $950 Installed in Puyallup (2026)

Installed kitchen cabinets cost $470 to $950 per linear foot in Puyallup and across Pierce County in 2026. A kitchen with 30 linear feet of cabinets lands between $14,100 and $28,500 for the cabinets alone, before sales tax. Countertops, flooring, plumbing, and electrical come on top of that.

Those numbers come from my own bids, not a national average. I’m a third-generation carpenter with 20+ years in the trades, and I’ve run Pacific Remodeling in Puyallup since 2018.

“We have used Pacific Remodeling LLC for 2 projects on our home now and have never been happier with the finished work. This last project was on our kitchen and it turned out amazing! It is hard to find the right words to describe how great this company is. Brad is professional, friendly, listens to what you want and works hard to make it happen. We are so lucky to have found these guys!” Traci H., Google review

What Kitchen Cabinets Cost Per Linear Foot in Pierce County

Kitchen cabinets cost per linear foot is the fastest way to ballpark a cabinet budget. You measure your runs, multiply by a rate, and you have a starting number. Here’s what that looks like with my installed rates.

Cabinet footageKitchen sizeLow end ($470/LF)Middle (~$710/LF)High end ($950/LF)
20 LFSmall galley or condo kitchen$9,400$14,200$19,000
30 LFMid-size L-shape$14,100$21,300$28,500
40 LFU-shape, or L-shape with island$18,800$28,400$38,000
50 LFLarge kitchen with island and pantry$23,500$35,500$47,500

If you want one number to plan around, use the middle. About $710 per foot gets you close enough to start a budget conversation.

What the box material does to your total

The biggest swing in that range comes from what the cabinet box is made of. These are my installed totals for a full kitchen of cabinets, by construction type:

  • Thermofoil: $8,000 to $22,000
  • Plywood box with wood doors: $13,000 to $35,000
  • Solid wood: $20,000 to $56,000

Thermofoil sits at the bottom of the per-foot range. Solid wood sits at the top. Plywood boxes with wood doors land in the middle, and that’s where I’d point most families I work with in South Hill, Sumner, and Bonney Lake.

Cost callout: Cabinets are the single largest line in most kitchen remodels. For the full picture, my Puyallup kitchen remodel cost guide shows where the rest of the money goes.

How to Measure Your Kitchen in Linear Feet

You can do this with a tape measure in 15 minutes. Measure the cabinets, not the walls.

  1. Measure every lower run end to end. Add them together. Leave out the range, fridge, and dishwasher openings unless cabinets will fill those spaces.
  2. Measure every upper run the same way. Skip windows and the space over the range if no cabinet goes there.
  3. Count tall cabinets three times. A tall pantry or oven cabinet counts once as lower footage and twice as upper footage. A 2-foot pantry adds 6 linear feet.
  4. Count both sides of an island if it has cabinets on both sides.
  5. Add it all up. That’s your linear footage.

A worked example

Say you have an L-shaped kitchen in a 1990s split-level on South Hill. Here’s how I’d count it:

  • Lower cabinets: 14 feet, after leaving out a 30-inch range and a 36-inch fridge opening
  • Upper cabinets: 11 feet, with nothing over the window
  • One 2-foot pantry cabinet: 2 lower plus 4 upper, so 6 feet
  • Total: 31 linear feet

At $470 per foot, that kitchen runs $14,570. At $950 per foot, it runs $29,450. The middle of the range puts it around $22,000.

Watch for this: Counting a tall pantry only once, or counting the fridge opening as cabinet footage, will throw your budget off by thousands. Measure twice, cut once applies to budgets too.

If you’re adding an island, my kitchen island remodel cost breakdown covers the plumbing, electrical, and stone that come with it.

Why Online Prices Look So Much Cheaper Than My Bids

Search this topic and you’ll find national guides quoting stock cabinets at $100 to $300 per foot installed. Custom cabinets show up at $500 to $1,200. Those sources don’t agree with each other, and most of them don’t agree with what a licensed contractor in the Pacific Northwest has to charge.

Here’s the thing. A lot of those numbers price the cabinets as boxes sitting in a warehouse, and they leave out labor, which national guides put anywhere from $50 to $300 per foot depending on which site you trust.

Many per-foot quotes also exclude:

  • Demolition and haul-off of the old cabinets
  • Countertops
  • Plumbing and electrical disconnect and reconnect
  • Drywall repair behind the old boxes
  • Flooring, backsplash, and lighting
  • Fillers, end panels, crown molding, and appliance panels
  • Shipping

My rate covers installed cabinets with my markup built in. That markup isn’t profit sitting in my pocket. It pays for the L&I coverage, liability insurance, the truck, the tools, my license, and the years it took to learn how to scribe a filler to a wall that’s out of plumb by half an inch.

Most homeowners have never had to think about that overhead. I get it. Someone making $30 an hour looks at a contractor’s rate and wonders where the money goes, and the honest answer is that it keeps a licensed, insured business alive long enough to stand behind the work.

Good, fast, or cheap. Pick two.

What Pushes Your Price Per Foot Up or Down

Linear foot pricing hides the stuff that actually drives cost. Two kitchens with the same 30 feet of cabinets can land $15,000 apart. These are the reasons.

Box material

Water-swollen particleboard cabinet box next to sturdy plywood cabinet box showing layered edge construction

Particleboard boxes cost less, but they don’t love water. In the Pacific Northwest, the sink base takes a beating. Pull the sink cabinet out of an older Pierce County kitchen and there’s a good chance the floor of that box is swollen or soft from a slow drip nobody caught.

Plywood holds a screw better and shrugs off a small leak. It also carries the weight of a quartz top without sagging. If I’m putting stone on top, I want plywood underneath.

Door style and finish

Flat slab, shaker, and inset kitchen cabinet door styles compared side by side in a painted white finish

A flat slab door costs less than a shaker. A shaker costs less than an inset door, where the door sits flush inside the frame and every gap has to stay even through wet winters and dry summers. Raised panels and glass fronts add more.

Finish matters too. Stain shows the wood. Paint covers it. Custom paint colors can carry an upcharge in some lines, so ask before you fall in love with a color. If you’re weighing two colors, read my two-tone kitchen cabinets guide first.

Drawers, glides, and inside storage

Open kitchen base cabinets with pull-out trash bin, spice pullout, and soft-close deep drawer storage

Drawer bases cost more than door bases because they have more parts. Soft-close glides, pull-out trash, roll-out shelves, and spice pullouts all add up. They’re also the upgrades you’ll touch every day, so they’re usually worth it. My kitchen storage solutions post walks through which ones earn their cost.

Framed vs. frameless construction

Framed cabinet with face frame beside frameless cabinet showing larger interior opening, doors open for comparison

Framed cabinets have a face frame around the front of the box. Frameless cabinets skip it, so you get a little more usable space inside. Bellmont Cabinet Co., a manufacturer in Sumner that has been building cabinets since 1988, makes frameless lines.

The point isn’t that one is better. The point is that a framed quote and a frameless quote aren’t the same product, so the per-foot numbers won’t line up exactly.

The parts nobody counts

Fillers, finished end panels, crown molding, light rail, toe kicks, and panels to cover a dishwasher or fridge. None of them add linear footage. All of them add cost. A cheap bid often leaves these out and change-orders you later.

Stock, Semi-Custom, or Custom: Which Fits Your Kitchen?

FactorStockSemi-CustomCustom
Where it lands in my rangeLow endMiddleMiddle to high end
SizesFixed widths3-inch incrementsAny dimension
Finish choicesA handfulDozensNearly unlimited
Lead time1 to 2 weeks3 to 4 weeks4 to 8 weeks or more
Box constructionParticleboard to plywoodUsually plywood availablePlywood or solid wood
Best forRentals, quick refreshMost family kitchensOdd spaces, older homes, high-end

Older homes in downtown Puyallup, Tacoma, and Lakewood rarely have square walls or standard dimensions. Stock cabinets in a 1950s kitchen often need big fillers to make up the gaps. Semi-custom or custom sizes let you use that space instead of covering it with a strip of painted wood.

People ask me about IKEA and box-store lines all the time. They cost less up front, and for a rental they can make sense. For a kitchen you plan to live in for 15 years, I’d look hard at the box material and the glides before you decide the savings are real.

When Refacing Beats Paying Per Foot for New Cabinets

If your cabinet boxes are solid and the layout works, you may not need new cabinets at all. Refacing puts new doors, drawer fronts, and veneer on your existing boxes.

In my bids, refacing runs $5,000 to $11,000. Full replacement with plywood boxes and wood doors runs $13,000 to $35,000. That’s a big gap for a kitchen that looks almost the same when you’re done.

Know when not to reface: If the sink base has water damage, the boxes are particleboard that’s coming apart, or you want to change the layout, refacing just puts a new face on a bad box. Replace those.

One more thing nobody mentions. New cabinets usually mean new countertops, because old tops rarely come off in one piece. Refacing lets you keep the counters if you like them. My kitchen cabinet refacing vs replacing guide covers the decision in detail.

Two Pierce County Kitchens With Shaker Cabinets

I’ve remodeled more than 20 kitchens since 2018. Two of them show the kind of choices that move your per-foot price.

Green Cabinet Kitchen Remodel

Green beadboard kitchen cabinets with herringbone marble backsplash, stainless range hood, and gas range

This Pierce County kitchen got green shaker cabinets, a herringbone marble tile backsplash, a stainless steel range hood, and quartz countertops. It’s a fresh take on a classic kitchen.

A color like this green is a finish choice, not a box choice. The shaker door and the box underneath set most of the per-foot price. The color sets how the room feels. See the full green cabinet kitchen remodel.

Dark Cabinet Kitchen with Island

Dark stained shaker kitchen cabinets with quartz island, gas cooktop, and double wall oven

This was a full kitchen remodel with dark stained shaker cabinets, quartz countertops, and a center island with a gas cooktop. It also has a linear mosaic tile backsplash, stainless steel appliances, a double wall oven, recessed lighting, and luxury vinyl plank flooring.

Kitchens like this one show why measuring matters. A double wall oven sits in a tall cabinet, so it counts three times in your footage. An island adds footage on its own. Check out the dark cabinet kitchen with island.

What Else You’ll Pay for Around New Cabinets

Cabinets are the biggest line, but they’re not the whole bill. Here’s what usually comes along with them in my Puyallup-area bids:

ItemInstalled Cost
Quartz countertops$165 to $230 per sq ft
Most kitchens in quartz (45 to 75 sq ft)$9,000 to $15,500
Backsplash tile$43 to $74 per sq ft
LVP flooring$11 to $17 per sq ft
Tile flooring$32 to $51 per sq ft
Load-bearing wall removal$4,000 to $13,000 additional

A mid-range full kitchen remodel in this area runs $35,000 to $88,000. A refresh or partial remodel runs $14,000 to $35,000. If you’d rather think in square feet, I broke that down in my kitchen remodel cost per square foot guide. For counters on their own, see the kitchen countertop replacement cost breakdown.

Kitchen Cabinet Cost Calculator: Run Your Own Numbers

You don’t need an app to get a solid ballpark. Here’s the formula I’d use on the back of a napkin:

  1. Measure your linear feet using the steps above.
  2. Multiply by $470 for a thermofoil or basic stock budget.
  3. Multiply by $710 for a plywood box, wood door middle-of-the-road budget.
  4. Multiply by $950 for solid wood and higher-end features.
  5. Add 15 to 20% for surprises behind the old cabinets.

That last step matters more than most people think. Pacific Northwest rain finds its way behind walls, and the area under a sink is where I see it most. You don’t know what’s back there until the old boxes come out.

Online cabinet cost estimators and calculators give you a number in 30 seconds. They don’t see your walls, your subfloor, or the 1960s wiring behind the backsplash. I built my own estimating tool, EstimationPro, because I was tired of spending evenings on spreadsheets, and I use it to price every job against current regional material and labor costs. It’s why my quotes come out itemized line by line instead of as one lump number.

Lead Times, Tariffs, and Permits in Pierce County

Lead times

Stock cabinets can arrive in a week or two. Semi-custom usually takes 3 to 4 weeks. Custom cabinets can take 4 to 8 weeks or longer. Order early, or your kitchen sits half-finished while you wait on boxes.

A full kitchen remodel runs 6 to 10 weeks of work. Smaller projects take 2 to 3 weeks. You can live in your home during the remodel, and I set up dust barriers to keep the mess contained.

Tariffs on imported cabinets

As of this writing, imported kitchen cabinets and vanities carry a 25% federal tariff. The federal government delayed a scheduled jump to 50% until January 1, 2027. These rules have shifted more than once, so ask your supplier where your cabinet line comes from and whether the price holds past the new year.

Permits

Swapping cabinets in the same spot usually doesn’t trigger a building permit. Moving the sink, adding circuits, or taking out a wall does. Puyallup, Tacoma, Lakewood, and unincorporated Pierce County each set their own rules, so check with the right office for your address. My guide to remodeling permits in Puyallup covers what triggers one.

Five Cabinet Quote Mistakes That Cost You Money

  1. Comparing an installed price to a materials-only price. One quote looks half the cost of the other because it doesn’t include labor.
  2. Ignoring fillers, panels, and crown. They don’t add footage, so they don’t show up in a per-foot rate. They show up later as a change order.
  3. Buying cheap boxes for an expensive top. Particleboard under a heavy quartz slab is a bad trade.
  4. Replacing good boxes you could reface. That’s $8,000 or more you didn’t need to spend.
  5. Picking the lowest bid without reading the scope. The cheapest bid usually leaves something out, and by the time you find out, your old kitchen is already in the dumpster.

That last one is the mistake I see hurt homeowners the most. Once demo starts, you can’t easily switch contractors. If this were my mom’s kitchen, I’d want her comparing line items, not totals.

Questions to Ask Before You Sign a Cabinet Quote

Print this out and bring it to every bid meeting:

  • Is this price installed, or materials only?
  • What is the box made of? Particleboard, plywood, or solid wood?
  • Are the cabinets framed or frameless?
  • Does the price include fillers, end panels, crown molding, and toe kicks?
  • Are soft-close hinges and drawer glides included?
  • Who handles demo and haul-off of the old cabinets?
  • What’s the lead time from order to delivery?
  • Where are the cabinets made, and could tariffs change the price?
  • Does the scope need a permit, and who pulls it?
  • How do you handle change orders?
  • What warranty covers the cabinets and the installation?

If you want to know what a good estimate meeting looks like, my free remodeling estimate post walks through it.

Kitchen Cabinet Cost Questions I Hear Most

How much do kitchen cabinets cost per linear foot? In my Pierce County bids, installed kitchen cabinets cost $470 to $950 per linear foot. Thermofoil and basic stock sit at the low end. Solid wood and custom features sit at the high end. Plywood boxes with wood doors land in the middle.

What does the average kitchen spend on cabinets? A 30-foot kitchen at the middle of my range runs about $21,300. Most full kitchens I price fall between $13,000 and $35,000 for plywood boxes with wood doors. Your footage and box material move that number more than anything else.

Is installation included in a per-foot cabinet price? It depends on who quotes it. My rate covers installed cabinets. Many online prices and box-store quotes cover the cabinets only, and national guides put labor at $50 to $300 per foot on top of that. Always ask.

How many linear feet of cabinets does a typical kitchen have? Small galley kitchens often have around 20 feet. L-shaped kitchens commonly run around 30. U-shapes and kitchens with islands can hit 40 to 50 feet. Measure yours with the steps above instead of guessing.

Is it cheaper to reface or replace kitchen cabinets? Refacing runs $5,000 to $11,000 in my bids. Replacement with plywood boxes runs $13,000 to $35,000. Refacing only makes sense if the boxes are solid and you like your layout.

Can I use a kitchen cabinet cost calculator to get an accurate price? A calculator gets you a ballpark. Multiply your linear feet by $470, $710, and $950 to see your range, then add 15 to 20% for surprises. A real number takes someone walking your kitchen and seeing what’s behind the old boxes.

Do I need to replace my countertops if I replace my cabinets? Almost always. Old countertops rarely come off in one piece, and new cabinets don’t always match the old footprint exactly. Budget for both.

Also Serving Pierce County

I’ve priced cabinets and kitchens across the area, from older homes in Tacoma and Lakewood to newer builds in Bonney Lake, Edgewood, and Graham. I also serve Sumner and South Hill. Builder-grade cabinets in a 20-year-old house and original boxes in a 1950s rambler need different answers, and I’ll tell you which one you’re looking at.

Get Your Free Cabinet Estimate

You’ve got the per-foot range and the math. What you don’t have yet is someone looking at your actual walls, your sink base, and your layout. I’ll walk your kitchen, measure your linear footage, and give you an itemized proposal so you know exactly what you’re paying for. Financing is available.

Thomas R. put it this way in his Google review:

“From the beginning to end Brad made the whole process easy. I was very pleased on the work that was done. I feel like I have a brand new kitchen and living and dining room. Every day I come downstairs I have a smile on my face looking at my new kitchen. He was always on time and left the job site clean when he left. I have plans to have him do more work at my house.”

My dad taught me to take pride in the work behind the walls, not just the parts you can see. That’s how I’ll treat your kitchen. See my Puyallup kitchen remodeling page for more of what I do, then get your free estimate or call me at (253) 392-9266.

Brad Zemke, Owner Pacific Remodeling LLC Puyallup, WA

Brad Zemke, owner of Pacific Remodeling LLC

Brad Zemke

Owner, Pacific Remodeling LLC • Third-Generation Carpenter • Air Force Veteran • 20+ Years in the Trades

I've been remodeling kitchens and bathrooms across Pierce County since 2018. Every project gets the same standard: treat it like I'm building it for my own family. That's the commitment.

Learn more about Brad →

Ready to Start Your Project?

Contact Pacific Remodeling for a free, no-obligation estimate on your kitchen or bathroom remodeling project.

Get Your Free Estimate

Get a free in-home estimate

I'll come out, measure, and talk through what you want. For an average kitchen or bathroom the visit takes about 30 minutes, and the estimate lists every line item so you can see exactly what's included.

  • Licensed, bonded and insured. WA Lic# PACIFRL814J4
  • Mon–Sat: 8:00 AM – 6:00 PM
Pacific Remodeling Online