A kitchen remodel without replacing cabinets usually costs $14,000 to $35,000 in Puyallup and the rest of Pierce County. That budget covers painted or refaced cabinets, new quartz countertops, a tile backsplash, new hardware, and often new flooring or lighting. A mid-range remodel with all-new cabinets starts around $35,000 and can climb to $88,000, so keeping solid boxes can cut your bill in half.
I’m Brad Zemke, a third-generation carpenter with 20+ years in the trades. I’ve run Pacific Remodeling in Puyallup since 2018 and finished more than 20 kitchens along the way.
“From the beginning to end Brad made the whole process easy. I was very pleased on the work that was done. I feel like I have a brand new kitchen and living and dining room. Every day I come downstairs I have a smile on my face looking at my new kitchen. He was always on time and left the job site clean when he left. I have plans to have him do more work at my house.” (Thomas R., Google review)
What a Kitchen Remodel Without Replacing Cabinets Costs in Puyallup
A kitchen remodel without replacing cabinets keeps your existing cabinet boxes where they sit and changes everything you see and touch around them. You keep the layout. You change the look.
Most keep-the-cabinets projects I price include some mix of these five pieces:
- A new cabinet finish (paint or refacing)
- New countertops, usually quartz
- A new tile backsplash
- New pulls, knobs, and soft-close hinges
- New flooring, lighting, or a sink and faucet
Here’s what each piece costs before sales tax.
| Upgrade | Typical Cost | Notes |
|---|---|---|
| Professional cabinet painting | $2,000-$6,500 for a full kitchen (national guides) | Labor makes up 70-85% of the bill |
| Cabinet refacing | $100-$250 per linear foot, about $4,000-$9,500 total (national guides) | New doors, drawer fronts, and veneer over your existing boxes |
| Quartz countertops | $165-$230 per sq ft installed | Most kitchens run $9,000-$15,500. No sealing needed |
| Granite countertops | $165-$205 per sq ft | Needs sealing every year |
| Butcher block countertops | $45-$120 per sq ft | Warm look, more upkeep |
| Laminate countertops | $20-$65 per sq ft | Lowest-cost counter option |
| Tile backsplash | $43-$74 per sq ft installed | A 30 sq ft backsplash runs about $1,300-$2,200 |
| LVP flooring | $11-$17 per sq ft installed | 100% waterproof |
| Soft-close hinges | $5-$15 per hinge (parts) | Blum BLUMOTION add-on dampers run about $5-$6 each |
The countertop, backsplash, and flooring numbers come from my own Pacific Remodeling bids in 2026. The painting and refacing lines come from national cost guides. I treat those two as a starting point until I count your doors and drawer fronts.
One 25-Foot Kitchen, Priced Two Ways
Picture a typical Puyallup kitchen with 25 linear feet of cabinets, 55 square feet of counter, 30 square feet of backsplash, and 150 square feet of floor. Here’s how the numbers shake out if you keep the boxes versus tear them out.
| Line Item | Keep and Paint the Cabinets | Replace the Cabinets |
|---|---|---|
| Cabinets | $2,000-$6,500 (paint) | $11,750-$23,750 (25 ft at $470-$950 per ft) |
| Quartz countertops (55 sq ft) | $9,075-$12,650 | $9,075-$12,650 |
| Tile backsplash (30 sq ft) | $1,290-$2,220 | $1,290-$2,220 |
| LVP flooring (150 sq ft) | $1,650-$2,550 | $1,650-$2,550 |
| Subtotal | $14,015-$23,920 | $23,765-$41,170 |
The cabinet line alone swings $9,750 to $17,250. That gap pays for your quartz.
Neither column includes plumbing, electrical, permits, or the 15-20% contingency I tell every homeowner to set aside. The replace column also tends to grow faster, because old countertops rarely come off intact, so new cabinets almost always force new tops whether you planned for them or not.
Should You Reface or Replace Your Kitchen Cabinets?
Paint or reface when the boxes are solid and the layout works for you. Replace when the boxes are failing or the layout fights you every single day.
That’s the short answer I give at every consultation. Here’s how the three options stack up side by side.
| Factor | Paint | Reface | Replace |
|---|---|---|---|
| Cost | $2,000-$6,500 (national) | $100-$250 per linear ft (national) | $470-$950 per linear ft (my bids) |
| Box condition needed | Sound | Sound | Any |
| Can you change the layout? | No | No | Yes |
| Door style changes? | No | Yes | Yes |
| Typical project time with counters and backsplash | 2-3 weeks | 2-3 weeks | 6-10 weeks for a full remodel |
| Best for | Good doors in a tired color | Dated door style on good boxes | Rot, sagging, or a bad layout |
For the deeper version of this decision, read my full breakdown of kitchen cabinet refacing vs replacing.
When Paint Is the Right Call
Paint works when you like the shape of your doors and just hate the color. Shaker and flat-panel doors in solid wood or MDF take paint well.
Thermofoil and laminate doors don’t take paint the way wood does. Those usually point you toward new doors instead. If you’re stuck on color, my guide to the best kitchen paint colors for resale and my two-tone kitchen cabinets guide will narrow it down fast.
When Refacing Makes More Sense
Refacing puts new doors, new drawer fronts, and new veneer on your existing boxes. You get a new door style without paying for new boxes.
One catch: new doors on worn or faded boxes look mismatched. Plan to refinish the face frames and exposed end panels so everything matches, and make sure your quote says so in writing.
When I Tell People to Replace
I’ll tell you to replace your cabinets when the boxes have water damage, the shelves sag, or the layout makes you walk around the island six times to make a sandwich. Putting $12,000 of quartz on top of failing boxes is like putting new tires on a car with a cracked frame. If the price of new cabinets scares you, my page on kitchen cabinet costs per linear foot shows exactly where that money goes.
The Sink Base Test I Run on Every Kitchen
Before I talk paint colors or quartz samples, I open the cabinet under your sink. That one door tells me more about your kitchen than anything else in the room.
Moisture is the number one enemy in the Pacific Northwest. Slow drips under sinks go unnoticed for years in homes all over South Hill, Lakewood, and Graham, and particleboard soaks that water up like a sponge. I’ve opened plenty of sink bases where the cabinet floor looked fine from above and crumbled the moment I pressed on it.
Here’s why it matters for this kind of remodel. Quartz is heavy. Your new tops need level, sturdy boxes underneath, and a soft sink base can crack a slab or let the whole run settle out of level.
Early in my career I got burned by underbidding jobs where the hidden damage showed up after demo. Now I check the boxes before I write a single number down. Measure twice, cut once.
Use this checklist before you spend a dime on a keep-the-cabinets remodel:
- Open the sink base and press on the cabinet floor. It should feel firm, not spongy.
- Look for swollen edges, peeling veneer, or dark water stains on every base cabinet.
- Set a level across the tops of the base cabinets. Note any run that dips more than 1/8 inch.
- Open every drawer all the way. Note sticky or sagging slides.
- Check face frames for cracks or loose joints.
- Note your door material: solid wood, MDF, thermofoil, or laminate.
- Ask yourself honestly whether the layout works for how you cook.
- Look up your home’s build year. Homes from before 1978 trigger lead-safe work rules.
If you check every box and the cabinets pass, you’re a strong candidate for a kitchen remodel without replacing cabinets.
Where Your Money Does the Most Work
When the cabinets stay, five upgrades carry the whole transformation. Here’s how I’d rank them by visual impact per dollar.
Countertops Change the Room Most

New counters are the single biggest change you can make without touching the boxes. Quartz is the most popular pick in my kitchens because it never needs sealing, and our wet winters don’t bother it.
Most kitchens with 45 to 75 square feet of counter run $9,000 to $15,500 in quartz. Plan on 2 to 3 weeks from templating to install, and the install itself takes 1 day for a standard kitchen. I remove and haul off your old countertops as part of the job.
You can visit the slab yard and pick your exact piece. For full pricing by material, see my guide to kitchen countertop replacement cost, or compare the two top choices in quartz vs. granite countertops.
The Backsplash Ties It Together

A new backsplash is where the personality shows up. Tile runs $43 to $74 per square foot installed, so a typical 30 square foot backsplash lands around $1,300 to $2,200.
Subway tile keeps the cost down. Herringbone and mosaic patterns push you toward the top of that range because they take more cuts and more hours on the wall. My post on kitchen backsplash ideas and costs walks through the patterns I install most.
Hardware and Soft-Close Hinges
This is the cheapest upgrade on the list and the one you’ll feel every day. Soft-close hinges run $5 to $15 each, and a kitchen with 20 doors needs about 40 of them.
Blum BLUMOTION add-on dampers cost about $5 to $6 each and clip onto many existing European-style hinges. Soft-close drawer slides cost a lot more, roughly five times a standard slide per drawer, so I usually save those for the drawers you open most.
Lighting

Under-cabinet lights make new counters and backsplash tile look twice as good at night. New pendants over a peninsula do the same. If you need a new circuit, that’s a licensed electrician and an electrical permit through Washington L&I. My guide to kitchen lighting upgrade costs covers the options.
Flooring

When the cabinets stay, the new floor runs up to the cabinet toe kicks. LVP runs $11 to $17 per square foot installed and handles PNW moisture well. Tile runs $32 to $51 per square foot. See my kitchen flooring options and costs for the full comparison.
Kitchen Remodel Ideas on a Budget That Still Look Like a Full Remodel
You don’t need $88,000 to walk into a kitchen that feels new. These are the budget moves I recommend most, roughly in order of bang for the buck:
- Paint the cabinets a darker or warmer color. Green, navy, and deep gray hide wear and look current.
- Go two-tone. Paint the base cabinets a dark color and keep the uppers light. The room looks taller.
- Swap in quartz. A small 40 sq ft kitchen in quartz runs $6,600 to $9,200.
- Run the backsplash to the ceiling behind the range. You add a few square feet of tile and get a focal point.
- Change every pull and knob. Matte black or brushed brass reads fresh against painted doors.
- Add soft-close hinges. About $200 to $600 in parts for a typical kitchen.
- Replace the sink and faucet with the counters. The old sink has to come out anyway.
Pick three or four of these and you’ll stay comfortably inside the $14,000 to $35,000 range.
How to Renovate a Kitchen for Cheap Without Paying for It Later
“Good, fast, or cheap. Pick two.” I say it at almost every consultation, because it holds true every time.
The cheapest kitchen renovation is the one where you keep the cabinets, keep the layout, and keep the plumbing where it sits. Moving a sink across the room or knocking out a wall is what turns a $20,000 refresh into a $100,000 project. Keep the footprint and you dodge most of the expensive trades.
What you can’t cheap out on is prep. TV shows paint a whole kitchen in a weekend, and they skip the degreasing, the scuff sanding, the primer, and the drying time between coats that make paint stick for years instead of months.
Benjamin Moore Advance, a common cabinet paint, runs about $80 to $95 a gallon and needs about 16 hours between coats. Sherwin-Williams Emerald Urethane Trim Enamel runs about $95 to $110 a gallon and recoats in 4 hours. Either one fails if nobody cleaned the grease off first.
Watch out for the lowball bid too. Some contractors leave out door backs, cabinet interiors, or the sink base repair to win the job, then hit you with change orders once your kitchen is torn up. By then you’re stuck. Compare every bid line by line so you’re comparing the same scope.
A Green Shaker Kitchen Worth Borrowing From
One of my favorite finish combinations is the Green Cabinet Kitchen Remodel I completed in Pierce County. I’m pointing you to it for the finish pairing, because it shows how much the surfaces around the cabinets carry a room.

That kitchen pairs green shaker cabinets with a herringbone marble tile backsplash, a stainless steel range hood, and quartz countertops. It’s a fresh take on a classic kitchen.
Look at what’s doing the work in that photo. The cabinet color sets the mood, the herringbone tile adds texture, and the quartz gives your eye a clean, quiet surface to rest on. If your boxes pass the sink base test and your doors are shaker style, a painted green, new quartz, and a patterned backsplash are three moves you can make without new cabinets.

Pierce County Permits and Lead-Safe Rules
A cabinet-keeping remodel needs fewer permits than a full gut, but it still needs some. Here’s what to know in Pierce County:
- Sink and faucet swaps: Pierce County requires a plumbing permit even for fixture replacement. Residential plumbing permits issue right after payment.
- Gas lines: Any change to gas piping, like moving a range connection, needs a gas piping permit.
- New circuits: The county doesn’t issue electrical permits. You pull those through Washington L&I, or Tacoma Public Utilities if you’re in their area.
- City limits: If you live inside Puyallup, Tacoma, or another city, check with your city’s permit office, since city rules can differ from the county’s.
- Lead paint: Many homes around Puyallup, Sumner, and Edgewood predate 1978. In those homes, Washington requires any paid contractor who disturbs painted surfaces to hold RRP certification and work for a certified firm.
Ask any contractor who plans to sand or scrape painted cabinets in a pre-1978 home whether they hold that certification. For more detail, read my guide to remodeling permits in Puyallup.
How Long a Kitchen Remodel Without Replacing Cabinets Takes
Plan on 2 to 3 weeks for most cabinet-keeping projects. A full remodel with new cabinets takes 6 to 10 weeks, so you get your kitchen back a lot sooner.
Here’s the typical order of work:
- Measure and select materials. Pick paint colors, quartz, tile, and hardware before anyone starts.
- Template the countertops. Your cabinets already stand in place, so the fabricator can measure early.
- Remove doors and drawer fronts. Painting or refacing starts while the fabricator cuts your slab.
- Repair the sink base and level the boxes. This step protects your quartz.
- Install countertops. One day for a standard kitchen.
- Hook up the sink and faucet. Expect a few days without a working sink between tear-out and hookup.
- Install the backsplash. Tile goes on after the counters set.
- Rehang doors and add hardware. Soft-close hinges and new pulls go on last.
You can live in your home the whole time. I set up dust barriers to keep the mess in the kitchen. Still, plan a few days of paper plates and takeout. For a week-by-week view of bigger projects, see how long a kitchen remodel actually takes.
Money-Wasting Mistakes on Cabinet-Keeping Remodels
I’d rather you hear these from me now than learn them the hard way:
- Putting new quartz on damaged boxes. If the sink base is soft, fix it first or replace that cabinet.
- Expecting a layout change. Painting and refacing leave the flow exactly as it is today.
- Comparing painting bids with different scopes. One bid covers door backs and interiors. Another doesn’t. Get itemized quotes.
- New doors on worn boxes. Refinish the face frames and end panels to match, or the new doors will make the old boxes look worse.
- Skipping the plumbing permit. That sink swap during the countertop change still needs one in Pierce County.
- Hiring an uncertified painter for a pre-1978 home. Ask for RRP certification before anyone sands.
- Choosing on price alone. The cheapest bid usually leaves something out. You get what you pay for.
Questions Homeowners Ask Me About Keeping Their Cabinets
What’s the cheapest way to renovate a kitchen?
Keep the cabinets, keep the layout, and keep the plumbing in place. Then put your money into paint, new hardware, and either new countertops or a new backsplash. A small 40 square foot kitchen in quartz runs $6,600 to $9,200, and laminate drops that to $20 to $65 per square foot if you need to go lower.
Is it cheaper to reface or replace kitchen cabinets?
Refacing costs less in almost every case. National guides put refacing at $100 to $250 per linear foot, while new installed cabinets in my bids run $470 to $950 per linear foot. On a 25-foot kitchen, that difference can easily top $5,000 even at the expensive end of refacing.
Can I change my kitchen layout if I keep my cabinets?
Not really. You can add an island or swap a single base cabinet, but painting and refacing keep the same footprint. If the layout drives you crazy, my guide to kitchen layout ideas for remodeling is a better place to start.
Does a kitchen refresh pay off when I sell?
A minor refresh returns about 75-85% at resale, compared to 60-80% for a mid-range full remodel. Smaller projects usually recover a bigger share of what you spend. My post on kitchen remodel return on investment has the full numbers.
Can I finance a kitchen remodel without replacing cabinets?
Yes. Financing is available, and a $14,000 to $35,000 project is easier to fit into monthly payments than a full gut. Just set your real budget first, then add 15-20% for surprises.
Also Serving Homeowners Across Pierce County
I work with homeowners all over the area, from South Hill and Graham to the cities around Puyallup. If you live in Tacoma, Sumner, Bonney Lake, Edgewood, or Lakewood, I’d be glad to look at your kitchen. You can see everything I offer on my Puyallup kitchen remodeling page.
Find Out If Your Cabinets Can Stay
The fastest way to know whether you can keep your cabinets is to have someone who’s spent 20+ years around cabinet boxes open the sink base and look. I’ll check your boxes, measure your counters, and give you a clear, line-by-line estimate so you can compare it against anyone else’s. I treat every kitchen like it’s my own mom’s house, because that’s how I’d want mine done.
Call me at (253) 392-9266 or get your free in-home estimate.
Brad Zemke, Owner Pacific Remodeling LLC Puyallup, WA




